Packaging food
- CMN/DMN manual cager/decager
- CSA semiautomatic cager
- DSA semiautomatic decager
- Automatic cager
- Automatic decager
- Shuttle
- Alligner
- Dryer
- Washing machine
- Cans conveyor
CMN/DMN manual cager/decager
Basic cager to facilitate manual crate filling. The operator works at waist-level to eliminate repetitive bending and increase filling speed. Compared to jumblestacking, layered stacking increases crate capacity by up to 20%.
CHARACTERISTICS
-
Up to 2 layers per minute with 2 trained workers
-
For rectangular Layer-in-Divider crates with false bottom
-
Lifting jack driven by hydraulic cylinder
-
Manual divider placement
-
Manual layer formation
-
Built in stainless steel AISI 304
-
Accepts standard-size Panini crates for diameter 1200–1400 static retorts and diameter 1200–1800 rotary retorts.
-
Optional rectangular or rotary receiving table, or receiving belt in steel mesh with gear reducer for speed setting
CSA semiautomatic cager
Semiautomatic cager designed to balance speed and cost. Suitable for most small and medium production lines with round containers such as cans and jars. The worker is assisted by various devices to decrease filling time and reduce fatigue caused by repetitive movements.
CHARACTERISTICS
-
From 1200–1800
-
Only for regular shaped cylindrical containers, suitable for push loading
-
For containers suitable for push-loading – symmetrical, flat sides, no protruding edges, and medium width-height ratio (tall+thin cans are unstable; flat+wide cans overlap)
-
Up to 2 layers per minute with 1 trained worker
-
For rectangular Layer-in-Divider crates with false bottom
-
Built in stainless steel AISI 304
-
Receiving belt in stainless steel (for glass) or plastic (for metal cans); rubber pushing belt for best traction
-
Adjustable side rails for different can diameters
-
Photo-eye to stop the lifter at the precise height
-
Accepts standard-size Panini crates for diameter 1200–400 static retorts and diameter 1200–1800 rotary retorts
DSA semiautomatic decager
Semiautomatic crater designed to balance speed and cost. Suitable for most small and medium production lines with round containers such as cans and jars. The worker is assisted by various devices to decrease filling time and reduce fatigue caused by repetitive movements.
CHARACTERISTICS
-
For containers suitable for push-loading – symmetrical, flat sides, no protruding edges, and medium width-height ratio (tall+thin cans are unstable; flat+wide cans overlap)
-
Up to 2 layers per minute with 1 trained worker
-
For rectangular Layer-in-Divider crates with false bottom
-
Built in stainless steel AISI 304
-
Belt in stainless steel (for glass) or plastic (for metal cans)
-
Adjustable side rails for different can diameters
-
Adjustable gear reducer to vary belt speed
-
Photo-eye to stop the lifter at the precise height
-
Accepts standard-size Panini crates for diameter 1200–1400 static retorts and diameter 1200–1800 rotary retorts
Shuttle
Automatic shuttle with double chain for loading and unloading.
